2.1. Get to know your product
2. MAGNETIC DOOR/
WINDOW SENSOR
Fit the sensor in a position that will cover your desired protection area:
Fix the bracket to the wall with the fixings kit supplied. For optimum
performance set the height of the bracket to 2 metres above ground
level.
Adjust angle of the PIR sensor to cover the required detection area.
To perform a walk test.
Press the test button
once and walk from let
to right in the room.
The LED indicator will
flash once when motion
is detected.
2.
a.
b.
2m
Status Indicator
Magnet
Transmitter
Suitable for fitting to doors,
windows and any object that
opens and closes.
The Window/door sensor transmits
a signal to the control panel/siren
when ‘contact’ is broken between
the transmitter and the magnet.
Transmits a low battery signal to
the ERA alarm control panel.
Where possible, mount the sensor in the corner of the room so that the logical path
of an intruder would cut across the fan detection pattern. A PIR responds more
effectively to movement across the device that to movement directly towards it.
Page 5