To test in Working Mode, walk in front of the sensor, the LED should flash once when
movement is detected.
If the sensor is triggered twice in 3 minutes it will enter into power saving (sleep mode).
If no movement is detected within the next 3 minutes, the sensor will return to normal
working mode.
Remove the activation strip. Fit the retaining
screw supplied.
Self-testing will commence for 1 minute as
indicated by the LED flashing every 2 seconds.
To enter Test Mode press the test button at the
back of the PIR. The LEDs will then flash once
when movement is detected, for up to 3 minutes.
3.
2.
1.
2.
1.
Infrared Sensor:
Detects movement and
triggers an alarm signal when the system
is armed.
Tamper Switch:
If the casing is opened
when in ‘working state’, the tamper
switch will be triggered and generate an
alarm signal.
1.3. PCB Layout
1.5. Working Mode
1.4. Test Mode
AA 1.5V LR6
Infrared
Sensor
Zone
Setting
Tamper
Switch
Test
Button
Status
Indicator
AA 1.5V LR6
Avoid mounting the sensor in areas where draughts may be present or where the
temperature may fluctuate greatly, such as near to windows, air conditioning, heating,
refrigeration units, cooking appliances and direct sunlight.
1.6. Installation
1.
Page 4