background image

 

PAGE 3 (13) 

K102 ERA HD Service Manual 

 

 

 

 

 

 

 

CONFIDENTIAL 

18.02.2016 

 

V1.0 

     

1.  INTRODUCE 

 
The purpose of this document is to help Service Centre workshop technicians to carry out service to pro18ducts. 
This Service Manual content of it is confidential. 

 

Please keep in mind also that this documentation is continuously being updated and modified, so watch always 
out for the newest version. 
 

Warnings and cautions 
 

Please refer to the phone’s user guide for instructions relating to operation, care and maintenance including 
important safety information. Note also the following: 
 

Warnings 
 

 

1.  Service  Centre  must  be  taken  on  installation  in  vehicles  fitted  with  electronic  engine  management 

systems  and  anti

–skid  braking  systems  (ABS).  Under  certain  fault  conditions,  emitted  RF  energy 

can  affect  their  operation.  If  necessary,  consult  the  vehicle  dealer/manufacturer  to  determine  the 
immunity of vehicle electronic systems to RF energy. 

 
2.  The  hand  portable  telephone  must  not  be  operated  in  areas  likely  to  contain  potentially  explosive 

atmospheres, EG petrol stations (service stations), blasting areas etc. 

 
3. Operation of any radio transmitting equipment, including cellular telephones,  may interfere  with the 

functionality of inadequately protected medical devices. Consult a physician or the manufacturer of 
the  medical  device  if  you  have  any  questions.  Other  electronic  equipment  may  also  be  subject  to 
interference. 

 

Cautions 
 

         1. Servicing and alignment must be undertaken by qualified personnel only. 

2. Ensure all work is carried out at an anti

–static workstation and that an anti–static wrist strap is worn. 

3. Use only approved components as specified in the parts list. 
4. Ensure all components, modules screws and insulators are correctly re

–fitted after servicing and 

alignment. 

5. Ensure all cables and wires are repositioned correctly. 

 
 
 
 
 
 
 
 
 

Summary of Contents for K102 ERA HD














Reviews: