Page 17
Please read the steps below carefully before restoring to factory settings.
NOTE:
To save the recordings on your memory card, remove the card from the
camera before restoring to factory settings.
Use Reset Pin to press the Reset Button (refer to page 5) for 10 seconds, during
which time, the camera will beep for 3 seconds, continue to hold the Reset Button
until two beeps are heard. After that, the camera will be restored to factory setting.
Restoring to factory setting will clear the connection between your camera and
smartphone, therefore you should add the camera to your App again.
6. RESTORING TO
FACTORY SETTINGS
1/4’ CMOS Sensor
0.02Lux @ (F2.0,AGG ON)
0 Lux with IR
1/50s to 1/100,000s
2.4mm F2.0
95°
H.264
Self-adaption
1280 x 720
20fps (1280 x 720)
Built-in MicroSD card slot, up to 32GB
IEEE802.11b/g/n
2.4GHz ~ 2.435GHz
20/40MHz Support
Temperature 0C - 60C (32F - 140F)
Humidity < 90% (non-condensing)
DC 5V 1A
5W MAX
91mm x 78mm x 155mm
Image Sensor
Min. Illumination
Shutter time
Lens
Angle of View
Video Compression
Bit Rate
Max. Image Resolution
Frame Rate
Storage
Wireless Standards
Frequency Range
Channel Bandwidth
Operating Conditions
Power Supply
Power Consumption
Dimensions (L x W x H)
7. SPECIFICATIONS