manualshive.com logo in svg

Equustek DL6000, User Manual, Page: 26 / 42

Share
Download
Equustek DL6000 User Manual Download Page 26

       

#286-5489 Byrne Rd., Burnaby, BC, V5J3J1, Canada          Phone: 888-387-3787 or 604-266-8547              www.equustek.com

 

26

 

 

 

 

14.

 

After selecting one of the three options, click 

Finish

 to perform the selected action.  If 

you have chosen to download the configuration, make sure you received message 

shown below before pressing reset to put the DL6000 online. 

 

 

 

 

5.3.2  Configuring Modbus Parameters using the DL Offline Manager 

The DL Offline Manager can also be used to setup the Modbus Slave parameters for the 

DL6000.  There is currently no ability to configure the Modbus Master settings.  If you 

are using the DL6000 as a Modbus Master, you will need to use the method described 

above. 

 

To use the DL Offline Manager, open the EQ32 Configuration software and choose the 

DL6000 models.  From the Main Menu, select the COM port that is connected to the 

DL6000 and Click the 

DL Offline Manager

 button.  After this is done, follow the steps 

Summary of Contents for DL6000











































Reviews:

No comments