Equitel N968, User Manual

Page: 55 / 155

September 2011 Ed.2.0
EQUITEL – Technical Manual N968
48
System Event Log—SMTP Configuration
Simple Mail Transfer Protocol (SMTP) is the standard for email transmissions across
the network. You can configure the SMTP server IP address, sender mail account,
password, and the recipient email account to which the e-mail alert will send. Besides,
this page provides the authentication mechanism including authentication steps
through which the client effectively logs in to the SMTP server during the process of
sending e-mail alert.

Email Alert: With this function enabled, the user is allowed to configure the detail
settings for sending the e-mail alert to the SMTP server when the events occur.

SMTP Server IP Address: Assign the mail server IP address (when Email Alert
is enabled, this field will then be available).

Sender: Type in an alias of the switch in complete email address format, e.g.
switch101@123.com , to identify where the e-mail alert comes from.

Authentication: Tick the checkbox to have the mail account, password and
confirm password fields show up. Configure the email account and password for
authentication procedures when this switch logs in to the SMTP server.

Mail Account: Set up the email account, e.g. johnadmin , to receive the email alert.
It must be an existing email account on the mail server.

Password: Type in the password to the email account.

Confirm Password: Reconfirm the password.

Rcpt e-mail Address 1 ~ 6: You can also specify up to 6 e-mail accounts to
receive the email alert.

Click Apply to have the configuration take effect.