Equitel N968, User Manual

Page: 151 / 155

September 2011 Ed.2.0
EQUITEL – Technical Manual N968
144
systemlog mode
[client|server|both]
G Specify the log mode switch(config)# systemlog mode
both
systemlog ip
[IP address]
G Set System log server
IP address.
switch(config)# systemlog ip
192.168.1.100
show systemlog E Display system log. Switch> show systemlog
show systemlog P Show system log client
& server information
switch# show systemlog
no systemlog G Disable systemlog
functon
switch(config)# no systemlog
smtp enable G Enable SMTP function switch(config)# smtp enable
smtp serverip
[IP address]
G Configure SMTP
server IP
switch(config)# smtp serverip
192.168.1.5
smtp sender G Send the sender
identification when an
event occurs
switch(config)# smtp sender
test01
smtp authentication G Enable SMTP
authentication
switch(config)# smtp
authentication
smtp account
[account]
G Configure
authentication account
switch(config)# smtp account
John
smtp password
password: [password]
confirm password:
[password]
G Configure
authentication
password
switch(config)# smtp password
password: 1234
confirm password: 1234
smtp rcptemail
[Index] [Email address]
G Configure Rcpt e-mail
Address
switch(config)# smtp rcptemail 1
Alert@test.com
show smtp P Show the information
of SMTP
switch# show smtp
no smtp G Disable SMTP function switch(config)# no smtp
event device-cold-start
[Systemlog|SMTP|Both]
G Set cold start event
type
switch(config)# event
device-cold-start both
event G Set the event type of switch(config)# event