Equipter RB4000, Service Manual, Page: 7 / 16

NOTE: Drain oil while the engine is
still warm to ensure rapid, complete
draining.
1. Undo the drain bolt using the 12mm
wrench provided in this service kit.
2. Drain oil through the hole into an
appropriate container.
3. Replace the bolt.
4. Remove the fill cap.
5. Insert the provided funnel through the
fill hole.
6. Add new oil using 1 US quart of low-30
synthertic oil.
7. Replace the fill cap.
R E P L A C E E N G I N E O I L
1. Unscrew the used hydraulic filter.
2. Twist on the new filter.
3. As you twist, you will feel the seal hit the filter mount housing. When this happens, turn it another
¾ turn.
Always dispose of used oil filters in compliance with your local regulations.
R E P L A C E H Y D R A U L I C O I L F I L T E R
• Visually inspect all brake pads for wear.
• If brakes aren’t working properly, confirm the fuse is working and check the brake fluid level.
I N S P E C T T R A I L E R B R A K E S
3
Always dispose of used oil in compliance with your local regulations.
Check / Replace Oil
Drain Oil Check / Replace Oil