1
These directions are the same for the T-Jet and the T-Jet2. The only difference is
that the T Jet 2 has more screws to remove on the front cover of the bed.
1.
Take off the Back cover off the bed. (This will be the side that does NOT
have the wheel for adjusting the height on it.)
There are 10 screws that hold it on. 6 screws on the back and 4 screws on the
sides (2 on each)
(This should come out in two pieces as shown below)
Technical Guide
T-Jet 1 & 2 Print Bed Adjustment
1-800-408-0040
(01) 201-797-1504
