3
4.
Adjust the two scissor lifts so they are even. After they are even, tighten
the connector screws from Step 3 and reassemble the bed plate.
5.
To check the level of the bed, crank the plate all the way to the up
position and make sure it is even with the lip of the bed.
6.
Once the bed is level, reassemble the back cover of the bed.
If you have questions, or your problem persists after completing this guide,
please call Technical Support at
1-800-408-0040 Or (01) 201-797-1504
.
Or send an e-mail to Support@
equipmentzone
.com.
1-800-408-0040
(01) 201-797-1504
