2
With the Rail Anchors in position, set place the Rail
3.
Supports in position, on the TOP and OUTSIDE edges
of the Platen rails.
Using the supplied Hex Wrench, hand tighten the screws
4.
to secure the Supports in place.
After completing this modification, you MUST recheck the Platen
to Print Head clearance of EACH Shirtboard prior to resumption of
printing. Failure to follow this guideline can result in a Print Head
collision and extended downtime and repair costs.
Quick Reference Guide
Installing Platen Rail Supports on the Blazer Pro
Version 1.1 May 2008
1-800-408-0040
(01) 201-797-1504
