Equipex SODIR PCC-400, Operation Manual

Page: 5 / 26

Cleaning
WARNING: Disconnect (unplug) electrical power supply before cleaning
Cleaning is very important in maintaining a safe and well working machine. Allow the griddle
to cool before cleaning. Using a scraper or a stiff wire brush, except for the chrome (PCC)
model, scrape the debris from the grill plate. To clean the griddle, scrape or brush cooking
debris toward you into the removable grease tray. For chrome (PCC) use only wooden
utensils. Use a cloth dampened slightly with soap and water to clean the stainless steel
housing. The grease tray may be cleaned in a pot sink or dishwasher. Clean the griddle
thoroughly at the end of each day. Failure to do so may cause hard to remove build up. In
order to remove the build up from the grill plate, use industry standard food service grade
degreasers or grease removers. We do not recommend using soap and water to clean the
plate, however, if soap and water are used while cleaning the plate the griddle will need to be
re-seasoned as per the above procedure. Make sure no water enters the unit through
ventilation holes.
DO NOT use an abrasive sponge on exterior or interior surfaces
DO NOT wash the oven under running water
DO NOT spray the exterior motor housing with any liquid
DO NOT allow water to drip into the motor housing or onto electrical
components
Maintenance
You should inspect all parts on a regular basis to ensure that all is in proper working order. If a
part is damaged, have the unit repaired by an authorized service agency prior to returning the
unit to operation. If you have trouble locating a service agency in your area, please consult our
website at