background image

 

 

IMPORTANT SAFEGUARDS 

 
 

When using electrical appliances, basic safety precautions should always be followed, including the 
following: 
 

1.  Read all the instructions before use. 

2.  Do not touch hot surfaces; use handles or knobs. 

3.  To avoid electric shock, 

do not immerse the power cord

or any part of the unit

, in any liquid. 

4.  Close supervision is necessary when any appliance is used, especially around children. 

5.  Unplug appliance from the electrical outlet when not in use, and before cleaning.  Allow appliance to 

cool before installing or removing any parts or accessories, and before cleaning. 

6.  Do not operate any appliance with a damaged cord or plug, or if appliance should sustain damage, or 

malfunction in any way.  In this event, return appliance to the nearest authorized service facility for 

examination, repair or adjustment. 

7.  The use of accessories and/or attachments not recommended by the appliance manufacturer may 

cause injury or damage to the appliance, and may void your warranty. 

8.  Do not use outdoors. 

9.  Do not allow the power cord to hang over the edge of a table or counter, or to be exposed to hot 

surfaces, as damage may occur. 

10. Do not place appliance on or near a burner, or in a heated oven. 

11. To disconnect an appliance, 

first

 turn all controls to the 

‘off’

 position; 

then

 unplug the power cord from 

the wall outlet. 

12. Do not use appliance other than for its intended use. 

13. SAVE THESE INSTRUCTIONS FOR LATER USE! 

Summary of Contents for Sodir Diablo VG










Reviews: