![background image](http://html.mh-extra.com/html/equip/usb2-0-pcmcia-adapter-2-port/usb2-0-pcmcia-adapter-2-port_manual_2421078006.webp)
Manual_
Page 6
www.equip-info.net
2.2 Windows 2000, ME, 98SE
1. Insert the Setup CD into the notebook’s CD-ROM or DVD-ROM drive.
2. Locate the program U2v242.exe in the Windows folder, and double click it to
run the setup program.
3. After the program has finished installation, restart the computer.
4. When the USB 2.0 PCMCIA Adapter is inserted as per instructions in Chapter 3,
the "New Hardware Wizard" will launch, and recognize the USB 2.0 PCMCIA Adapter
as a "NEC PCI to USB Enhanced Host Controller".
5. Windows will automatically install the correct driver and display a confirmation.
Installation is now complete and the USB 2.0 PCMCIA Adapter is ready for use.
2.3 Verifying the Windows installation
To verify the USB 2.0 PCMCIA Adapter has been successfully installed in Windows, open
the System Properties from the Control Panel, and click the Device Manager. The USB
CardBus Adapter should be listed as follows:
NEC PCI to USB Enhanced Host Controller
NEC PCI to USB Open Host Controller
NEC PCI to USB Open Host Controller
USB2.0 Root Hub Device
USB Root Hub
USB Root Hub
Note:
The “system properties list” varies slightly between different Windows versions.
The following screens list the appropriate entries found in different Windows
operating systems: