![background image](http://html1.mh-extra.com/html/equip/sw0202c/sw0202c_manual_2421112003.webp)
-
4
-
Computers Connection
Now you want to connect two computers to the KVM
Switch. Use a male-to-male Mini-DIN-6 cable to
connect from the first PC’s keyboard port to the
corresponding
K1
port; and, use another male -to-male
Mini-DIN-6 cable from the PC’s mouse port to the
M1
port. Then, connect your computer’s VGA port to the
HD-DB-15 port of the KVM Switch as shown in figure 2.
Follow the same procedures for the second computer
using
K2
and
M2
port.
Figure 2: COMPUTER Connection
If your computer uses serial mouse, a mouse adapter
should be connected to the computer’s mouse port as
shown in figure 3.
(Note: use only the mouse adapter
comes with the kit)
-
5
-
Figure 3: Adapter and serial mouse connection
NOTE
:
1.
There is no serial mouse for the
C
(CONSOLE)
,
just a PS/2 mouse. The KVM Switch's
automatic mouse conversion system allows you
to connect computers using serial mouse and
control the computers from one PS/2 mouse.
2.
Be ware that the mouse adapter can only be
used on the
PC
side. Attempting to use it at the
C
(CONSOLE)
side will not work.
3.
If your PC uses an AT style keyboard, you will
need an AT-to-PS/2 keyboard adapter, DIN-5
male to mini-DIN-6 female, at PC side in order to
plug the cable to the SW0202C.