Table of Content
■
Introduction
Overview… … … … … ...… … … … … … … … … … … ....1
Features… … … … … … … .… … … … … … … … … ..… .2
■
Installations
Console Connection… … … … … … .… … … … … … ...3
Computers Connection… … … … … … .… … … .… .… 4
Initial Power-up… … … … … … .… … … … … … ..… … .6
■
Operations
Front Panel operation… … … … ...… … … … ...… ..… .7
Hot-key commands… ...… … … … ...… … … … … ..… .7
■
Appendices
Specifications… … … … … … ..… … … … … … … … … .9
Please read this manual thoroughly
and follow the
Installation
procedures to
prevent any damage to the KVM Switch or any
connecting device.
This device is tested and complies with Part 15 of
FCC/class B, CE and VCCI rules.
-
1
-
-----------------
Introduction
Overview
The KVM Switch SW0202C is a computer switch that
allows access to two IBM compatible computers from
one keyboard, mouse and monitor. Switching between
computers is as easy as pressing the push button or
entering hot-key commands from your keyboard. There
is no interface card and software to install. The
powerful KVM Switch is independent of the computer
operating system, allowing the attached computers to run
different applications. The space-saving design enables
you to connect all the cables to the back of the
SW0202C taking the least amount of space on your desk.
It is a valuable tool for your computer management.
Automatic Mouse Conversion
This technology enables you to connect computers with
either PS/2 or serial mouse ports to the KVM Switch, and
control both computers from one PS/2 mouse. The
KVM Switch automatically identifies the mouse and
switches to proper mouse protocol.
