5
Remote Control Operation SF-300
For best result, use SF-01CX or SF-34CX controllers. Abide by
controller user manual specifications regarding the number of
strobes that can be linked to one controller.
1. Plug one end of a mono (not stereo) microphone signal cable with
standard 1/4-inch mono microphone jacks (4 of figure 1) into the
signal input connector on back of unit. Plug the other end of the
cable into the signal output socket on the controller.
2. If desired, connect another strobe: Plug one end of another signal
cable in to the signal output socket (4 of figure 1) on the back of
the first strobe; plug the other end of the signal cable to the signal
input socket on the back of the second strobe. Follow the same
procedure to link more strobes, if desired.
3. Set all strobe manual control knobs to the OFF (no flash) position.
4. Refer to your strobe controller user manual for operating.
Summary of Contents for SF-300
Page 1: ...RAYS STROBES SF 300 SF 300D User manual Version 1 0 ENGLISH ...
Page 17: ...RAYS STRO BES ...
Page 18: ......