background image

21

   

Equinox ESP-2 MI Serial Hub Installation Guide

© 2003 Equinox Systems. All rights reserved. Reproduction without permission prohibited.

Equinox and Avocent are registered trademarks or trademarks of Avocent Corporation. All other 
brands and product names are trademarks of their respective holders.

Equinox makes no representations or warranties with respect to the contents hereof and 
specifically disclaims any implied warranties of merchantability or fitness for any particular 
purpose. Information is subject to change without notice and does not represent a commitment on 
the part of Equinox Systems.

Federal Communication Commission (FCC) Statement

WARNING: Changes or modifications to this unit not expressly approved by the party responsible 
for compliance could void user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference when the equipment is operated in a commercial 
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not 
installed and used in accordance with the instruction manual, may cause harmful interference to 
radio communications. Operation of this equipment in the residential area is likely to cause harmful 
interference in which case the user will be required to correct the interference at his own expense.

Canada

This digital apparatus does not exceed the Class A limits for radio noise emissions from 
digital apparatus set out in the Radio Interference Regulations of the Canadian Department of 
Communications.

Le présent appareil numérique n ´émet pas de bruits radioélectriques dépassant les limites 
applicables aux appareils numériques de la classe A prescrites dans le Règlement sur le 
brouillage radioélectrique édicté par le Ministère des Communications du Canada.

European Union

WARNING; This is a Class A product. In domestic environment, this product may cause radio 
interference in which case the use may bequired to take adequate measures.

Summary of Contents for ESP-2 MI

























Reviews: