18
Equinox ESP-2 MI Serial Hub Installation Guide
To request a reinitialization:
1. Click
Initialize
from the Main Menu.
2. Click
the
Re-Initialize
button.
After the reinitialization and reboot, the web interface will try to reconnect to the unit, using
the predefined IP address (192.1.1.1). If this fails, or if the web interface does not return within
30 seconds, direct your browser to the predefined IP address (192.1.1.1).
You may also reinitialize the ESP-2 MI using the
INIT
button on the front panel. See
Reinitializing and Resetting the Unit
for more information.
Changing the Password
The Change Password window allows you to change the password.
To change the password:
1. Select
Change Password
from the Main Menu.
2. Enter the new 5-32 character password in the New Password
fi
eld. Passwords are case-
sensitive and can contain any alphanumeric characters.
3. Repeat the new password in the New Password (re-enter)
fi
eld.
4. Click
the
Apply
button.
Verification will check that both password entries match and contain a valid number of
characters, then the EEPROM configuration will be updated. A reboot is not required. The
new password will be required the next time the ESP-2 MI web interface is accessed.
