Equinox Systems Equinox Console Manager CCM4850 CCM4850 CCM4850, Installer/User Manual

Page: 99 / 100

LIMITED WARRANTY
Equinox warrants that the Product(s) shall be free from manufacturing defects in materials and workmanship
for a period of five (5) years from the date of delivery provided that the Product was properly installed and used.
Defects, malfunctions or failures of the warranted Product caused by damage resulting from acts of God (such
as floods, fire, etc.), environmental and atmospheric disturbances, other external forces such as power line
disturbances, host computer malfunction, plugging the board in under power, or incorrect cabling and damage
caused by misuse, abuse and unauthorized alteration or repair are not warranted.
This warranty is limited to the repair and/or replacement, at Equinox’ option, of the defective Product during its
warranty period. Customer must obtain a Return Material Authorization (RMA) number prior to returning the
defective Product to Equinox for service. Customer agrees to insure the Product or assume the risk of loss or damage
in transit, to prepay shipping charges and to use the original shipping container or equivalent. Contact Equinox
Customer Support at 954-746-9000 for further information. Product repaired or replaced shall be warranted for
a period of ninety (90) days or for the duration of the initial Product warranty period, whichever is longer.
THE PROVISIONS OF THE WARRANTY ARE IN LIEU OF ANY OTHER WARRANTY, WHETHER EXPRESSED
OR IMPLIED, WRITTEN OR ORAL, AND EQUINOX’ LIABILITY ARISING OUT OF THE MANUFACTURE,
SALE OR SUPPLYING OF THE PRODUCT AND ITS USE, WHETHER BASED ON WARRANTY, CONTRACT,
NEGLIGENCE, PRODUCT LIABILITY OR OTHERWISE, SHALL NOT EXCEED THE ORIGINAL COST OF
THE PRODUCT. IN NO EVENT SHALL EQUINOX BE LIABLE FOR UNINTENDED OR CONSEQUENTIAL
DAMAGES, INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS OR USE DAMAGES ARISING OUT OF
THE MANUFACTURE, SALE OR SUPPLYING OF THE PRODUCT.
© Copyright 2004 Avocent Corporation. All rights reserved.
INSTRUCTIONS
This symbol is intended to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the appliance.
DANGEROUS VOLTAGE
This symbol is intended to alert the user to the presence of uninsulated dan-
gerous voltage within the product’s enclosure that may be of sufficient magni-
tude to constitute a risk of electric shock to persons.
POWER OFF
This symbol indicates the principal on/off switch is in the off position.
POWER ON
This symbol indicates the principal on/off switch is in the on position.
PROTECTIVE GROUNDING TERMINAL
This symbol indicates a terminal which must be connected to earth ground
prior to making any other connections to the equipment.