Equinox Systems Equinox Console Manager CCM4850 CCM4850 CCM4850, Installer/User Manual

Page: 61 / 100

Chapter 5: CCM Appliance Commands 49
Server CLI command
The Server CLI command:
•
Specifies the console port type
• Specifies the CLI access character
• Enables or disables device connection from the console port
• Specifies a modem initialization string
• Specifies port history mode operations
• Specifies a port time-out value
At least one parameter must be specified.
Access right: SCON
Access level: APPLIANCEADMIN
Syntax
SERVER CLI [TYPE=< type >] [CHAR=^< char >] [CONNECT=ON|OFF]
[HISTORY=HOLD|AUTO,CLEAR|KEEP] [MODEMINIT=“< string >”]
[TIMEOUT=< time-out >]
Server SNMP Trap Enables/disables SNMP traps.
Server SNMP Trap
Destination
Defines/deletes destinations for enabled SNMP traps.
Server SSH
Enables/disables SSH session access to the CCM appliance and specifies the
SSH authentication method.
Table 5.9: Server Command Summary (Continued)
Command Description
Table 5.10: Server CLI Command Parameters
Parameter Description
TYPE= <type >
Terminal type to be used on the console port. The entire name of the type must
be specified; abbreviations are not permitted. Valid types are: ASCII, VT52,
VT100, VT102, VT220 and VT320.
Default: ASCII
CHAR=^< char >
CLI access character in the range A through _ (underscore). (The allowable
ASCII range is 0x41-0x5F and 0x61-0x7A.) The CLI access character, when
pressed simultaneously with the
Ctrl
key during a session with an attached
serial device, will suspend the session with the device and place you in CLI
command mode. This value will be used if a port’s Port Set command contains a
Char=None parameter.
Default = ^d