www.prolight.co.uk
Super Boogie
User Manual
9
Display invert setting:
To access the display invert setting, press the
“MENU”
button and use the
“UP”
and
“DOWN”
buttons on
the rear of the unit to show
dIsp
on the LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to choose between
dIsp
or
ds1p
. Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Software version:
To access the fixtures software version, press the
“MENU”
button and use the
“UP”
and
“DOWN”
buttons
on the rear of the unit to show
uer
on the LED display. Now press the
“ENTER”
button.
The unit will now display the fixtures software version e.g.
u10
.
To exit out of any of the above options, press the
“MENU”
button.
IR remote functions:
Button functions:
01 - Sets the unit into blackout on or off
02 - Runs the Auto modes - Use the Auto ‘+’ and ‘-’
buttons to change the desired program
03 - Runs the Sound 1 mode
04 - Runs the Sound 2 mode
05 - Runs the Sound 3 mode
06 - Runs the Strobe mode
07 - Sets the auto program - Use the ‘+’ and ‘-’ buttons
to change the desired program
08 - Sets the run speed/sensitivity - Use the ‘+’ and ‘-’
buttons to change the desired speed (auto mode)/
sensitivity (sound mode)
09 - Sets the strobe mode run speed - Use the ‘+’ and ‘-’
buttons to change the desired speed
–
+
–
+
AUTO
–
+
STROBE
SPEED
SPEED/
SENSITIVITY
ON/OFF
STROBE
AUTO
SOUND
2
SOUND
1
SOUND
3
01
02
03
05
04
06
07
08
09
Operating instructions
