Equinox Systems EQLED203, User Manual

Page: 8 / 12

www.prolight.co.uk Super Boogie User Manual
8
Operating instructions
Master/slave mode:
To set the master unit, press the “MENU” button and use the “UP” and “DOWN” buttons on the rear of
the unit to show
SLnd
on the LED display. Press the “ENTER” button and use the “UP” and “DOWN”
buttons on the rear of the unit to show
NASt
. Press the “ENTER” button to confirm the setting.
To set the other units in slave mode, press the “MENU” button and use the “UP” and “DOWN” buttons on
the rear of the unit to show
SLnd
on the LED display. Now press the “ENTER” button and use the “UP”
and “DOWN” buttons to choose either
SL1
or
SL 2
.
Press the “ENTER” button to confirm the setting.
The unit/s will now run in sequence with the master unit.
To exit out of any of the above options, press the
“MENU” button.
Please ensure that all slave units are set to the same DMX channel mode as the master unit.
Sound active:
To access the sound active setting, press the
“MENU”
button and use the
“UP”
and
“DOWN”
buttons on
the rear of the unit to show
SoUn
on the LED display. Now press the “ENTER” button and use the “UP”
and “DOWN” buttons to choose between
So 0
to
So16
. Press the “ENTER” button and use the “UP”
and “DOWN” buttons to select the sound sensitivity between
Se O
to
Se99
. Press the “ENTER”
button to confirm the setting.
Value: 0 - 99 (0 = low, 99 = high)
To exit out of any of the above options, press the
“MENU” button.
Auto Modes:
To access the auto setting, press the “MENU” button and use the “UP” and “DOWN” buttons
on the rear of the unit to show
Aut0
on the LED display. Now press the
“ENTER”
button and use the
“UP” and “DOWN” ” buttons to choose between
Au 0
to
au16
. Press the “ENTER” button and use the
“UP” and “DOWN” ” buttons to select the auto speed between
SP 0
to
SP 9
.
Press the
“ENTER”
button to confirm the setting. To exit out of any of the above options, press the
“MENU” button.
Display blackout:
To access the display blackout setting, press the “MENU” button and use the “UP” and “DOWN” buttons
on the rear of the unit to show
LEd
on the
LED
display. Now press the
“ENTER”
button and use the
“UP” and “DOWN” buttons to choose between
on
(display blacks out) or
ofF
(display always on).
Press the “ENTER” button to confirm the setting. To exit out of any of the above options, press the “MENU”
button.