(sound on) or
(sound off) mode. Once the mode has been
selected, press the
ENTER
button to confirm. To go back to the functions
without any changes press the
MENU
button again. Press and hold the
MENU
button for one second or wait for one minute to go back to the
main menu.
Sound Sensitivity
Press the
MENU
and use the
UP
and
DOWN
buttons to select
and select the sound sensitivity between value 0 and 100. Press the
ENTER button for confirmation after value selection. To go back to the
functions without any changes press the
MENU
button again.
Led Display
Press the
MENU
button to select
. Press the
ENTER
button and the
display will blink. Use the
DOWN
and
UP
buttons to select the
(Led display on) or
(Led display off) mode. Once the mode has
been selected, press the
ENTER
button to confirm. To go back to the
functions without any changes press the
MENU
button again. Press and
hold the
MENU
button for one second or wait for one minute to go back
to the main menu.
Display Inversion
Press the
MENU
button to select
. Press the
ENTER
button to change
the mode
(display normal), it will be automatically saved after 8
seconds. Press the
ENTER
button again to select the mode
(display
inversion). To go back to the functions press the
MENU
button. Press and
hold the
MENU
button for one second or wait for one minute to go back to
the main menu.
Display normal mode is for floor standing the unit.
Display inversion mode is for hanging the unit upside down.
Pan Inversion
Press the
MENU
button to select
. Press the
ENTER
button and the
display will blink. Use the
DOWN
and
UP
buttons to select the
(normal) or
(pan inversion) mode. Once the mode has been
selected, press the
ENTER
button to confirm. To go back to the functions
without any changes press the
MENU
button again. Press and hold the
MENU
button for one second or wait for one minute to go back to the
main menu.
Tilt Inversion
Press the
MENU
button to select
. Press the
ENTER
button and the
display will blink. Use the
DOWN
and
UP
buttons to select the
(normal) or
(tilt inversion) mode. Once the mode has been
selected, press the
ENTER
button to confirm. To go back to the functions
without any change press the
MENU
button again. Press and hold the
MENU
button for one second or wait for one minute to go back to the
main menu.
Auto-Test
Press the
MENU
button to select
. Press the
ENTER
button and the
unit will run a self-test with its built-in programs. To go back to the
functions without any changes press the
MENU
button again. Press and
hold the
MENU
button for one second or wait for one minute to go back to
the main menu.
