Operation modes:
The Trinity Beam has 4 modes of operation as follows:
1, Sound active mode
To select sound active mode set dip switch 10 to
ON
and all others to
OFF.
You can now use the
sensitivity control on the back panel to set the required sound level.
2, Auto run mode
To select auto pattern mode, set dip switch 9 and 10 to the
ON
position and all others to
OFF
.
The Trinity Beam will now cycle through all it’s internal patterns.
3, DMX mode
To select DMX mode, set dip switch 10 to
OFF
. You can now set the required DMX address using
dip switches 1 to 9. Please refer to the chart below for DMX functions.
The DMX address starts at 1.
4, Master/slave mode
To set the unit/s in slave mode, set dip switch 3 to the
ON
position and all others to
OFF
. The
Trinity Beam laser/s will now run in sequence with the master unit.
DMX function chart:
Equinox Trinity Beam Laser
Operation modes
Example:
DMX manual mode
Channel
DMX Address
Function
CH.1
CH.2
0-70
71-140
141-210
211-255
Blackout
Sound active
Auto run
0-255
28 Pattern selector (CH.1, DMX manual mode)
Summary of Contents for EQLA42
Page 1: ...Order code EQLA42 User manual...
Page 18: ...Notes Equinox Trinity Beam Laser Notes...
Page 19: ......
Page 20: ...www prolight co uk...
