Equilume Stable Light, Product Manual

Page: 9 / 16

9
Step 1: Ensure mains power is turned on.
Step 2: Set Controller ID
The screen will display the ‘SET CONTROLLER ID’ window. If using a single
Controller to manage Stable Lights, select 1. If multiple Controllers are required
for larger facilities then give each additional Controller a new ID (1, 2, 3.. etc).
Select

to save. Controller ID is now set.
Step 3: Set date and time
The screen will display the ‘ENTER DATE’ window. Enter the date in the (YYYY/
MMM/DD) format. Select

to save. Date is now set.
The screen will display the ‘ENTER TIME’ window. Enter the time in the (HH.MM)
12 hour format followed by PM or AM. Select

to save. Time is now set.
Step 4: Set location
The screen will display the ‘SET LOCATION’ window. For this data entry, please
visit: www.whatsmygps.com to retrieve GPS location co-ordinates. Enter
address to find the Decimal Degrees associated with GPS location. On the top
line of the Controller screen, enter the LATITUDE decimal degrees followed by
“N’ or ‘S’ (e.g. 123.4567° N). On the bottom line, please enter the LONGITUDE
decimal degrees followed by ‘W’ or ‘E’ (e.g. 333.4445° W).
Select

to save. Location is now set.
Step 5: Set Pin
The screen will display the ‘CREATE PIN’ window. Highlight OK in the enter PIN
window and enter the 4-digit PIN.
Note: We recommend choosing a number that can be easily remembered. It is important
to keep this PIN safe as it will be needed for most data entry. It is also advised that this PIN
is kept between managers/owners to avoid disruption to programs after set-up.
Select

to save. Pin is now created.