Equilume Stable Light, Product Manual

Page: 10 / 16

10
Step 6: Pair Lights
The next step is to pair the Stable Lights to the Controller. Select Pair Light icon
from the Main Menu. There are 5 options available to select; Paired, Pair, Un-
pair, Rename and Home. Select Pair icon. Enter PIN and select

. The next
window will display ‘ENTER SERIAL NUMBER(S) TO PAIR EXISTING LIGHTS(S)’.
Highlight ‘NO’ and select (•).
The Controller now enters pairing mode and a 5 minute count down is initiated
on the screen. As the timer is counting down, press the silver button on top of
each Stable Light to establish a connection (hold silver button for 2 seconds
and release). The Stable Light will flash red and turn off when it has successfully
communicated with the Controller. The identification number for the paired
Stable Light will now appear on the Controller’s display. A new 5 minute
countdown commences once a Stable Light has been successfully paired.
Go to the next Stable Light and repeat until all Stable Lights appear on the
Controller’s display with their corresponding numbers. It is advised to pair lights
in order of stable arrangement in yard/barn.
Step 7: Program Lights
Stable Lights will not turn on until a program is loaded. From the Main Menu,
select the Program icon. Within this menu, the options are View (to view
previously loaded programs), Setup (to select a program for loading) and
Home (return to main menu).
To load new programs or change programs, select Setup and ‘ENTER PIN’. Enter
PIN and select

. Stable Lights can be identified by their unique identification
number (available on door card). Highlight by selecting one or more Stable
Lights to be programmed. Select

.
Note: To change the programs, override the existing program loaded.
A window will then display 5 options
• CIRCA ANNUAL
• LONG DAY
• SHORT DAY
• REFLECT (mimics environmental light cycle at location)
• ERASE (Removes previously loaded program and deactivates Stable Light)