Equilume Stable Light Product Manual Download Page 11

11

Note: Please consult with an Equilume representative for advice on Program selection.

Highlight program, select (•). Then enter the ‘SUNRISE TIME’. This is the time 
at which the Stable Light starts to brighten to mimic dawn each day. Dim up 
occurs over a 20 minute interval. Therefore, it is recommended to choose a 
time that corresponds with 20 minutes prior to the start of daily activity in the 
yard/barn (e.g. if staff arrive at 7.00AM, set sunrise time for 6.40AM). Ensure 
‘NIGHT RED LIGHT’ is ON and select (•). A ‘PROGRAM SUMMARY’ will be 
displayed.  Select 

.  When the window shows ‘LIGHT PROGRAMMED’ the 

programming is complete. If programming more than one Stable Light, ‘LIGHT 
PROGRAMMED’ will display the unique identification code below to confirm 
program has been loaded to a specific Stable Light below it.
 

Note: ‘NIGHT RED LIGHT’ is not to be deactivated unless advised by Equilume. It is 

recommended that this function remains ‘ON’ at all times. 

Step 8: View programs (optional) 

To view existing programs, select the View icon in the Program Menu. This will 
display the list of paired lights. Highlight a Stable Light to view and select 

. The 

PROGRAM INFORMATION page will then be displayed. To view the program 
information for another Stable Light, select the back button (<) and highlight 
another Stable Light on the list.  When finished, select the home button to return 
to the Main Menu. 

Note: The Stable Light’s unique ID code can be viewed here if it has been previously 

changed. 

Step 9: Renaming lights (optional) 

Each Stable Light can be renamed as required. 

To rename a Stable Light, first select the Pair icon from the Main menu. Select 
the Rename icon and ‘ENTER PIN’.  Select 

. Highlight the Stable Light to be 

renamed. Select 

. You will then be prompted to ‘ENTER NEW NAME’ (20-digit 

limit). Use the 

˄

 and 

˅

 buttons to do this for each letter/number. Select 

. The 

new name is now saved. To exit the window select 

.

Summary of Contents for Stable Light

















Reviews: