SEQUENCE FOR CHECKING THE CORRECT HYDRODYNAMIC FUNCTIONING OF THE
DISHWASHER
7
7
Block the two distributors
Fit transparent door
(available in the 96 range)
Activate micro door
Select a short programme
Start the machine and check the water
intake
Is the water
intake correct?
NO
Yes
Check the water output from the outlets of the 2
distributors is at sufficient pressure
In models with mobile conduit in the
upper distributor check its height.
Unblock distributors
Check distributor revolutions
96 R – over. 34
±
Inf. 58
±
3
Previous R 11 27
±
3 Inf. 32
±
3
Revolutions
correct ?
Check the water installation control system by means of
Sheet 8 procedure.
YES
Check intakes for dirt or foreign bodies
NO
Check if there are leaks at the joins of the 2 halves
of the two distributors
Check functioning of wash pump
Check detergent dispenser opening
Review installation and functioning of drain.
Sheet11
4.7 min.
WATER LEVELS : 96 range. h’ 76 LITRES
The tub axis has 2 indicative marks between which the water level must be maintained – Without covering the element
5.2 max.
WATER LEVELS : Previous range , example : LV-93, 95, 98,99 The level is considered correct when the water reaches or is at a level between the decalcifier screw and the deposit cap and the element
22.
