OPERATOR INSTRUCTION MANUAL
IM-HPccSD_Rev05
HP350SD; HP550SD;
HP1000SD
DOUBLE ACTING HYDRAULIC
SEALED HAND PUMPS
2
1.
INTRODUCTION
The HP350SD, HP550SD and HP1000SD Hydraulic Hand
Pumps output is regulated to 700 bar (10,000 psi) and
is delivered from an output port threaded ⅜” NPT. The
HP350SD, HP550SD and HP1000SD can be used with
any double acting 700 bar (10,000 psi) rated hydraulic
equipment.
The diaphragm oil reservoir means that, unlike conven-
tional hand pump units, the HP350SD, HP550SD and
HP1000SD are operable at all angles and are highly
resistant to accidental spillage of hydraulic fluid.
Pressure rating:
●
1st stage:
13.8 bar (197 psi)
●
2nd stage:
700 bar (10,000 psi)
2.
TOOL SAFETY
2.1
GENERAL SAFETY
These instructions cover the safe operation and
maintenance of THE EQUALIZER HP350SD, HP550SD,
HP1000SD HYDRAULIC SEALED HAND PUMPS. The
use of these tools should be as part of a broader task-
based risk assessment, which should be carried out by the
operation supervisor or other competent person.
Failure to comply with the safety information contained
within this manual could result in personal injury or
equipment damage. Read all instructions, warnings and
cautions carefully, and follow all safety precautions.
The safety of the operator, any assisting personnel and
the general public is of paramount importance. Always
work in accordance with applicable national, local, site &
company-wide safety procedures.
2.2
PERSONNEL COMPETENCY
Only personnel deemed competent in the use of mechanical
and hydraulic equipment should use these tools.
2.3
DISCLAIMER
Equalizer cannot be held responsible for injury or damage
resulting from unsafe product use, lack of maintenance
or incorrect product and/or system operation. If in doubt
as to the safety precautions and applications, contact
Equalizer using the contact details at the back of this
manual.
Summary of Contents for HP1000SD
Page 19: ......
