40
Air Powered (Pneumatic)
Users Guide • SP1416
41
Removing The Blade
A hex screw holds the blade in place.
Loosen the screw and pull the blade
out of the sheath. Insert a new blade
and tighten the screw. The blade
retaining screw is accessible through
the side of The Express
®
Air base.
Maximum Operating Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 psi
Air Consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 cfm
Strokes Per Minute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0-2,800
We recommend using a filter, airline pressure regulator and lubricator
mounted as closely as possible to the tool.
The Equalizer
®
Express
®
Air is a multipurpose auto glass
removal tool, designed primarily for inside use on
bonded auto glass parts. It may be used outside on
A-pillars for windshields of some vehicle models,
and on all broken tempered parts. The blade
shaft is enclosed in a sheath which protects
interior car parts. Most of the cutting
is accomplished on the end of the
blade, therefore the operator utilizes
upper torso muscles, making the
tool easy to operate and ergo-
nomically friendly. The Equalizer
®
Express
®
Air’s specific blade stroke
length and dynamic two-way cutting power slices through the toughest
urthane adhesive with ease.
To keep the sheath cool we recommend
that you periodically apply a light film
of high heat grease (part #4237) to the
blade part that is inside the sheath.
