32
General Safety Information
1. Always wear safety glasses and safety gloves when using the
Equalizer
®
Express
®
XRP 18-Volt Tool.
2. Do not activate Equalizer
®
tools until they are in the cutting position.
Disengage the tool and let it stop before taking it out of the urethane.
3. The blade is sharp and can cut even when the tool is not running.
4. Do not force the tool. Put light forward pressure on the tool. Let it
do the work.
5. Consider your work environment. Do not use or expose power tools
to rain or damp weather.
6. Unplug from electric source before servicing and when changing
accessories.
7. Stay Alert!! Watch what you are doing. Use common sense.
2611 Oakmont Drive
Round Rock, Texas 78665
Telephone: 512.388.7715
Toll Free USA & Canada: 800.334.1334
FAX: 512.388.4188
Email: [email protected]
Web: www.equalizer.com
FOR MORE INFORMATION ABOUT THIS TOOL
PLEASE CONTACT...
33
Important Instructions For Your Equalizer
®
Express
®
36-Volt Battery & Charger
The DC9000 charger is designed to charge the EBD838 battery in
approximately 1 hour. This charger requires no adjustment and is
designed to be as easy as possible to operate. Simply plug in your charger,
place your battery pack into the receptacle, and it will automatically
charge the pack.
Charging Procedure
1. Plug the charger into an appropriate outlet before
inserting the battery pack.
2. Insert the battery pack into the charger. The charger
is equipped with a three-light fuel gauge that will blink
according to the state of charge of the battery pack.
The completion of charge is indicated by the three red lights
remaining ON continuously. The pack is fully charged and may be
used at this time or left on the charger.
Charger Diagnostic
This charger is designed to detect certain problems that can
arise with the battery packs or the charger. Problems are
indicated by the three red lights flashing together in different
patterns.
DC9360
DC9000
