Eqation EQI-70VS Installation, Use And Maintenance Instructions Download Page 27

 

 

 

 

POST 

AS 

POSTCARD

 

WARRANTY 

 

Dear Sir/Ms: 
 
We  would  like  to  thank  you  for  purchasing  an 

EQUATION

 product and we hope you will enjoy it 

for many years to come. Your product is based on 
the knowledge, research and craftsmanship of an 
outstanding group of people who have dedicated 
their  efforts  to  the  production  of  this  product  for 
your benefit. 
       This  product  is  guaranteed  by 

EQUATION

 

based on the terms and conditions included in the 
warranty.  Please  read  the  said  terms  and 
conditions carefully. 
       If you should have any query, please contact 
our  Technical  Department  before  installing  the 
product. Do not forget that the life of the product 
directly depends on the correct installation of the 
device. 
        

EQUATIÓN

 products are made to last. Take 

care of them! 

WARRANTY NUMBER     

 

The warranty will be valid with the purchase invoice. 
 
However,  in order  to  keep  the manufacturing  number 
of  the  equipment,  please  send  this  completed  card 
within 30 days after the date of purchase. 

 

Device data 

Model………………………………  Num. …………..…………….. 
Date of purchase …………………………………..………………… 
Invoice num.……………………………………………...………….. 
Distributor …………………………………………………………….

 

 

 

WARRANTY NUMBER

     Nº   

 

Device data 

Model………………………………   

Num. 

…………..………………... 
Date of purchase …………………………………..………………… 
Invoice num.……………………………………………...………….… 
Distributor ……………………………………………………………

 

 

 

NAME, ADDRESS AND STAMP OF DISTRIBUTOR 

NAME, ADDRESS AND STAMP OF DISTRIBUTOR 

 

EQUATION, Offers a 

TWO YEAR

 warranty on its products. 

This warranty certificate will only be valid if it has been filled in by the retailer at the time the purchase is made and is produced, whenever required, together with the 
original invoice, without changes to the original data introduced. 
Based on this warranty certificate, EQUATION will repair or replace any broken or defective components of its devices based on the following conditions:

 

  

1. 

The warranty comes into force on the purchase date of the product as indicated on the warranty document and only covers damage or breakages due 

to manufacturing defects. 

It will be presumed that all faults found within SIX months after the purchase of the product already existed when the device was 

delivered, except when the said presumption is incompatible with the nature or the product or with the type of fault - Official State Gazette., Law 23/2003 
of 10th July 2003)

 

2. 

In accordance with the said Law, this warranty covers labour and materials for any possible repairs, as well as travel and transport costs to the home 

of  the  user,  if  the  said  repair  work  is  possible  and  proportionate,  during  the  first  six  months.  From  the  seventh  month  and  until  the  end  of  the  warranty  period, 
EQUATION will only cover the cost of materials. Any repair work will be considered disproportionate if it implies costs for EQUATION that, in comparison with other 
types of repair work, is unreasonable, considering the value of the device without any defects and if an alternative repair method exists that can be performed without 
great inconvenience to the user. 
3. 

This  warranty  does  not  cover  periodical  servicing  or  maintenance  operations  performed  by  the  authorised  Official  Technical  Service  (Start-up, 

installation). 
4. 

No liability will be accepted for indirect damage caused to or by this device, especially if derived from any inadequate inst allation or failure to comply 

with 

current applicable laws and regulations.

 

5. 

Exclusions from the warranty include any damage caused due to maltreatment of the device, its incorrect use, incorrect handling and/or maintenance 

by unauthorised personnel, as well as to any lack of maintenance and the use of accessories that have not been approved by EQUATION or that have not been 
included in the instruction manual. 

This warranty excludes damage due to incorrect power supply, storms, unsuitable fuel, damage caused by water with 

physical-chemical features that cause incrustation or corrosion, frost, fire, incorrect regulation, problems due to chimney draw, damage caused during 
transport, parts subject to wear by use (joints, handles, filters, injectors, components, plastic elements, anodes, pilots, glass....). 

6. 

No individual or legal entity is authorised to alter this warranty in any way. No compromise will be accepted that results from other tacit or express 

warranties, clauses and other obligations, whether special or imposed by trade or sale customs. 
7. 

This device will not be considered to have any manufacturing defect if it has to be adapted or modified to comply with technical or safety

  

regulations in 

force in places or countries other than those for which the device was originally designed and manufactured. Therefore, this warranty does not cover any of the above-
mentioned adaptations, modifications or changes, nor any attempt to introduce them, whether performed correctly or not, or any damages derived from them. 

8. 

Customers must notify EQUATION within 2 months from the date they detect any defect or failure affecting the 

device

 to be able to benefit from this 

warranty.

 

9. 

The geographical coverage of this warranty only includes the countries in which EQUATION, a subsidiary company or an official importer distribute its 

products and where Community Directive 2011/83/UE is in force. In countries that do not belong to the European Union, the warranty remains in force under the same 
terms except for point 2.

 

10. 

This warranty does not affect the rights of consumers as stated by Law 23/2003 on Warranties covering the sale of Consumer Goods. The Vendor will 

fill-in and stamp this Warranty Certificate. Show this Certificate to the Technician together with the purchase receipt if you require any technical assistance.

 

Summary of Contents for EQI-70VS





























































Reviews: