18
the adhesive strips to the back side of the mounting plate.
You should be able to read the letters on the back side
(according to figure).
<PA66>
• Remove the protective film from the adhesive strip.
•
Press the assembled MAX! Eco switch with the back
side to the wall in the position where it should subse-
quently be attached.
Screw mounting:
•
Choose a site for installation.
Make sure that electrical lines in the wall will not be
damaged.
•
Position the mounting plate on the desired site on the
wall. Make sure that the arrow on the mounting plate is
pointing upwards.
•
Use a pen to mark the positions of 2 bore holes
A
(dia-
gonally opposite) in the mounting plate on the wall. The
bore holes
B
can be used for installation with a flush-
mounting box.
