Configuring Leviton OmniTouch 7 Touchscreens & Helios 2N door stations with the Epygi
QX IP PBX
Revision 1.0 17
31-Mar-16
1.
Open the controller’s PC Access file.
2.
Click on Extended Setup and enter the following:
•
SIP Server Address – enter in the IP Address assigned to the Epygi.
•
SIP Server Port – this is the SIP port configured in the Epygi (5060 is the default)
•
SIP Page Group – this is the number created in the Epygi to page a group of extensions (e.g. extn 401).
3.
Click on OmniTouch 7 Screens and enter the following for each OmniTouch 7 (Note: only the fields required for door
station integration are discussed here):
•
ID – enter in the desired ID for each touchscreen installed.
•
SIP Username – this is the SIP Registration Username assigned to the OmniTouch 7 in the Epygi IP Line Settings.
•
SIP Password - this is the SIP Registration Password assigned to the OmniTouch 7 in the Epygi IP Line Settings.
