SERVICE MANUAL EIS 165.3 N/P KW (short version) inglese
Autori: Serralunga M.
14/10/2021
20
NO COPYING IN ANY FORM WITHOUT WRITTEN PERMISSION FROM EPTA QUALITY MANAGEMENT
By using the lockring plier (
6
) fix joint (
5
) on the copper pipe (
A
).
5.10
CHECK THE CORRECT CLOSING OF THERMODYNAMIC CIRCUIT
Use the electronic leak detector (
9
) in order to check if leak of gas are present.
‐
End of high pressure pipe (lockring joint).
‐
End of low pressure pipe (lokring joint).
‐
Suction pipe welding.
‐
Charge pipe welding.
‐
Discharge pipe welding.
6
5
A