210
Parent topic:
Related tasks
Matching the Screens Automatically
You can automatically correct the brightness and tint for multiple projectors based on the brightness and
tint settings you selected for the master projector. You can schedule automatic screen matching using
the scheduling function of the projector.
Before you start, make sure of the following:
• Select
Multi-Projection
for the
Color Mode
setting and adjust the
Brightness
,
Contrast
,
Color
Saturation
,
Tint
,
White Balance
, and
Advanced
settings in the Image menu, as necessary, on the
master projector.
• You are projecting on a matte white diffusion screen that is flat and even.
• The projected image is between 100 to 300 inches (254 to 762 cm) and is rectangular after tiling.
• All the projectors are connected to a network and the
Location Setup
setting has been configured.
• Nothing is blocking the built-in camera on the front of each projector.
• The projected images do not overlap or have gaps between them.
• The projectors are installed parallel to the screen.
• The Blend Range setting is set between 15 to 45%.
• The
Brightness Level
is set to the maximum for all projectors.
• The model number of all projectors is Pro L30000UNL or Pro L30002UNL.
Note:
Auto adjustment is not available for the following lenses: ELPLR05, ELPLL09, or ELPLL10. After
auto adjustment, the movement range for lens shift is reduced.
1.
Press the
Menu
button.
2.
Select the
Extended
menu and press
Enter
.
3.
Select the
Multi-Projection
setting and press
Enter
.
4.
Select the
Screen Matching
setting and press
Enter
.
Summary of Contents for V11H944820
