TM200 Service Manual
- 16 -
1.8 Paper
Sensors
The printer has 2 paper sensors as follows:
Paper roll near-end sensor
The sensor detects a near-end of a paper roll.
When the paper roll diameter becomes sufficiently small, the sensor detects a
near-end of the paper roll and the PAPER indicator lights on.
Paper roll end sensor
This sensor detects whether paper is present or not.
When the sensor detects a paper-end, the printer stops printing.
Note:
After installing new paper roll, close the printer cover; then the printer restarts
printing.
Cover Open Button
When the cover open button (located to the right of the cover) is pressed, the printer
cover is opened. When the cover is closed, the cover open button is latched.
Note:
Be sure to use the cover open button to open the printer cover.
Do not open the cover during printing.
Do not open the cover during the autocutter is operating; otherwise the mechanism
may be damaged.
Cover Open Sensor
The cover open sensor monitors the printer cover. When the sensor detects a cover open
during printing, the
ERROR
light blinks and the printer stops printing. The printer
recovers when the cover is closed.
When the sensor detects a cover open while the printer is in the standby status, the
printer goes offline. The printer recovers when the cover is closed.
Note:
Whether the cover is open or not does not affect the status reported by the paper roll end
sensor.
1.9 Standard
Accessories
Sample
paper roll x 1 roll
User's Manual
Exclusive external power supply unit and power cord
Disc x 1
Communication printer cable
