Epson TM U325D Operator'S Manual Download Page 9

Page: 9 / 61

vi Introduction

Introduction

Features

The TM-U325D and TM-U325PD are high-quality POS printers that can print a
mutiple-line validation and on receipt paper (paper roll). The printer has the
following features:

❏

Easily changeable interface specifications for serial or parallel by exchanging the
interface board.

❏

Excellent reliability (long life) and good operability (drop-in paper loading).

❏

Multiple-line validation printing (possible to print a maximum of 9 lines).

❏

Compact and light in weight.

❏

High-speed printing through logic-seeking control.

❏

Excellent reliability and long life due to adoption of stepping motor, both for
moving the carriage and for paper feeding.

❏

Felxible line space setting permits printing in accordance with any user-defined
format.

❏

Conforms with ESC/POS



; excellent universality of control.

❏

Built-in drawer kick-out interface provides capability to drive two drawers.

❏

Selectable character fonts (7

9 and 9

9).

❏

Semi-automatic paper loading capability.

❏

AC adapter provides compact power supply.

❏

Automatic status back (ASB) function that automatically transmits changes in
printer status.

Summary of Contents for TM U325D






























































Search results

Summary of Contents for TM U325D

Reviews:

Related manuals for TM U325D

Brands by name

Popular brands

Epson TM U325D, Operator'S Manual

Search results

Summary of Contents for TM U325D

Reviews:

Related manuals for TM U325D

Brands by name

Popular brands