manualshive.com logo in svg

Epson TM U325D, Operator'S Manual

Share
Download
Epson TM U325D Operator'S Manual Download Page 12

1–2

   Setting Up the Printer

Selecting a Location

Place the printer on a surface that is as horizontal as possible. Make 
sure that the printer does not tilt more than 15 degrees.

The printer should be installed so that is does not move or vibrate 
during paper cutting or the drawer kick-out operation.

Fastening tape is available as an option.

Adjusting the Paper Roll Near-End Sensor 

Notes:

Use paper rolls with an inner core diameter of 10.5 to 12.5 mm 
so that the sensor detects the remaining paper correctly.

When the last portion of a paper roll bears red markings, the 
marking is sometimes an adhesive that pulls the entire paper roll 
up. In this case, the sensor may not detect the remaining paper 
correctly.

If a paper roll easily becomes loose because of the quality of the 
paper or other factors, incorrect detection of the paper end may 
result.

1. Make sure that the power supply is disconnected from the 

printer.

Summary of Contents for TM U325D






























































Reviews:

No comments

Brands by name

Popular brands

Load more brands