62
Appendix
Paper Specifications
Paper types
Specified thermal paper
Form
Roll paper
Size
Roll paper diameter
Max.: 83 mm {3.27"}
Roll paper spool outer diameter
Min.: 18 mm {0.71"}
Roll width when taken up
80 + 0.5/-1.0 mm
Paper width
79.5 ± 0.5 mm
Paper thickness
Maximum of 80 μm, minimum of 48 μm
Specified original paper type
TF50KS-EY (Nippon Paper Industries Co., Ltd.)
PD160R (Oji Imaging Media Co., Ltd.)
KT48FA (Koehler Paper Group)
Epson Certified Media List for Thermal Receipt Printers
U
www.epson-biz.com/?content=sht_tm_media
•
Paper must not be pasted to the roll paper spool.
•
For the best print quality for each paper type, it is recommended to set the print density.
(See
"Software Settings" on page 26
•
Use of thermal paper with a pre-printed recording surface should be avoided. Using it can cause
the thermal head to stick to the thermal paper surface during printing, and cause printing
failure and other problems. The pre-printing also can result in reduced print density. Using
thermal paper with a pre-printed recording surface, pre-printing should be done in accordance
with the conditions (ink type, printing and other conditions) recommended by the paper
manufacturer, and the thermal paper should be checked to ensure that there is no faulty
printing, loss of print density, or other problems.
