background image

69

Chapter 4 Application Development Information

4

Application Development Information

This chapter describes how to control the printer and gives information useful for printer application develop-
ment.

Controlling the Printer

The printer supports the following command systems:

ePOS-Print XML (Wi-Fi model only)

ESC/POS

Users can control the printer by using the aforementioned commands, or the following development kits or
drivers.

ePOS-Print SDK

OPOS ADK

OPOS ADK for .NET

JavaPOS ADK

EPSON Advanced Printer Driver (APD)

ePOS-Print XML

ePOS-Print XML is the Epson original control command system for POS printers defined in XML. With ePOS-
Print XML commands, you can print in environments where http communication is available and from OS
applications.

For detailed information about ePOS-Print XML, see the ePOS-Print XML User's Manual.

On this printer, ePOS-Print XML is only supported by a Wi-Fi model.

ESC/POS

ESC/POS is the Epson original printer command system for POS printers and customer display. With ESC/POS
commands, you can directly control all the TM-P20 printer functions, but detailed knowledge of printer speci-
fications or combination of commands is required, compared to using drivers and applications.

For detailed information about ESC/POS commands, see the ESC/POS Command Reference.

To use ePOS-Print XML or SDK for JavaScript, set ePOS-Print to Enable in EpsonNet Config (Web Ver-

sion) beforehand.

For details about EpsonNet Config (Web Version), see 

"EpsonNet Config (Web Version)" on page 65

.

Summary of Contents for TM-P20





































































































Reviews: