48
User NV memory capacity
1 KB (initial setting)
64 KB
128 KB
192 KB
NV graphics memory capacity
None
64 KB
128 KB
192 KB
256 KB
320 KB
384 KB (initial setting)
Print density
Selectable from levels 1 to 13 (70%
130%) (initial setting: level 7)
Depending on the paper type, it is recommended to set the print density as shown in the table below for the best
print quality.
Print speed
Selectable from levels 1 to 10 (Slow
Fast) (initial setting: level 10)
Original Paper Type
Density Level
P35024, KT55F20, KT48F20, AF50KS-E
7 (100%)
F5041(48), F5041(55)
8 (105%)
P30023, P31023
12 (125%)
If the print density is set to a darker level, printing speed may be reduced.
If the print density is set to a darker level, paper dust accumulates on the print head and print may
be faint. For information about how to clean the thermal head, see
"Cleaning the Printer" on page
Depending on print conditions, such as print duty, print head temperature, and data transmission
speed, print speed is automatically adjusted, which may cause white lines due to intermittent print
(the motor sometimes stops). To avoid this, keep the print speed constant by setting it lower.
Summary of Contents for TM-P20
