53
Chapter 3 Advanced Usage
Main connection interface
•
Auto (interface that receives data first) (initial setting)
•
USB
•
Bluetooth
•
Ethernet/Wi-Fi
•
No main connection I/F
Autocutting after closing cover
•
Cuts (initial setting)
•
Does not cut
Paper reduction
Extra upper space reduction
•
Disabled (initial setting)
•
Enabled
Extra lower space reduction
•
Disabled (initial setting)
•
Enabled
Line space reduction rate
•
Not reduced (initial setting)
•
25%
•
50%
•
75%
Line feed reduction rate
•
Not reduced (initial setting)
•
25%
•
50%
•
75%
•
When using this printer with multiple interfaces, make sure the interface that is always
connected to be set as the main connection.
•
When using multiple interfaces, set the receive buffer capacity to 4 KB.
•
You cannot use wired LAN and wireless LAN at the same time.
•
When you do not use the
Bluetooth
function, set the
Bluetooth
security level to "Middle" or
"High" to prevent unauthorized access to the printer over
Bluetooth
. You can change the security
level by using Epson TM Utility, TM-m30II Utility, or in the Interface Setup mode.
•
The displayed items vary depending on the interface configuration.
•
For information about the function, see
