6
Cautions on the Ink Cartridge
CAUTION
The usable ink cartridges vary depending on the product. Use an ink cartridge that
matches your printer.
(See
"Product Specifications" on page 95
.)
Do not touch the IC chip on the cartridge. Doing so may cause operating/printing malfunc-
tion.
This product uses ink cartridges equipped with an IC chip that monitors the amount of ink
used by each cartridge. Cartridges are usable even if they are removed and reinstalled.
However, if an ink cartridge in which little amount of ink remains is removed and rein-
stalled, it may not be usable. Some ink is consumed each time cartridges are installed
because the product automatically checks their reliability.
Since ink cartridges are designed to stop the operation before ink runs out completely to
maintain the quality of the print head, some ink remains in the used ink cartridge.
Ink is also consumed during head cleaning maintenance.
Do not turn off the product or open the Front cover while charging Ink Power LED is flash-
ing. Opening the cover may cause the ink to be recharged, resulting in more ink being con-
sumed. Also, it may cause printing malfunction.
Do not disassemble the ink cartridge. Doing so may cause ink to adhere eyes and skin.
Do not disassemble and remodel the ink cartridge. Doing so may cause printing malfunc-
tion.
Use of an old ink cartridge may result in reduced print quality. Use it up within six months
after opening the package. The usage period for ink cartridges is printed on the packaging
of individual ink cartridges.
If ink contacts your skin, eyes, or mouth, take the following actions.
When it gets onto your skin, immediately wash the area with soap and water.
When ink gets into your eyes, immediately flush them with water. Leaving the ink as is may
result in bloodshot eyes or mild inflammation. If something is wrong, immediately consult
with a doctor.
When ink gets into your mouth, immediately spit it and consult with a doctor.
There may be some ink around the ink supply port on the removed ink cartridge. Take care
so that it does not stain the desk or other surface.
Do not remove the ink cartridge, except when you replace it.
Do not open the ink cartridge package until you are ready to install it in the product.
Do not shake the ink cartridge too hard. The ink cartridge may leak if you shake it around
too much or push the sides strongly.
Do not allow foreign objects to fall into the cartridge installation section. Doing so may
cause printing malfunction. Remove any object that might have fallen into the installation
section, taking care not to damage the section.
When ink is charged for the first time (right after purchase), ink is consumed for filling the
print head nozzle (ink discharge holes) to get ready for printing. That is why the number of
the printable sheets may be fewer than for the cartridges to be installed later.
Dispose the ink cartridges properly following the law or regulations of your country and
area.
If you turn the power off the product using the power switch, the print head is automati-
cally capped, which prevents the ink from drying. After installing the ink cartridges, be
sure to turn the power off using the power switch when you are not using the product. Do
not pull out the power plug or trip the breaker while the power is on.
Keep ink cartridges out of the reach of children.
A cool and dark place is recommended to store ink cartridges.
If the ink cartridge is stored in a cold place for a long period of time, let it warm up at least
3 hours before using it.
If moving or transporting the product after the ink cartridges are installed, leave them
installed during the moving or transporting process.
