manualshive.com logo in svg

Epson TM-C100, Technical Reference Manual

Share
Download
Epson TM-C100 Technical Reference Manual Download Page 36

3-6

   Using the Printer

Rev. C

4. Remove the new ink cartridge from its box and open the transparent plastic bag.

Note:

Install the ink cartridge in the printer promptly after opening the plastic bag.
If an opened cartridge is left out of its plastic bag for an extended period of time, print quality may be 
adversely affected.

5. Insert the ink cartridge into the top of the ink cartridge holder in the printer. Make sure the 

ink cartridge is facing the right way.

Note:

Also see the label on the underside of the printer cover.

6. Push the ink cartridge down gently until it clicks firmly into place.

7. Close the printer cover (the 

INK

 LED goes off).

Note:

The printer starts the ink replacement sequence automatically for about 1 minute. During the ink 
replacement sequence the 

POWER

 LED flashes. When the ink replacement sequence is finished, the 

POWER

 LED stops flashing, and the printer is ready for printing.

Do not turn off the printer or open the printer cover during the ink replacement sequence (the 

POWER

 

LED is flashing). If you do so, the printer must perform the ink replacement sequence again from the start. 
This will waste ink.

Summary of Contents for TM-C100

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands