5
R4C428_V2
Setup.bk
Rev_C
A5 size
SETUP.FM
1/13/00
Pass 0
R
Proof Sign-off:
K. Nishi, Crestec
_______
N. Nomoto
_______
K. Pipa
_______
For Windows 98 and 95 with a parallel connection
After connecting the Stylus Scan to your computer as described
in “Using the parallel port (for Windows 98 or 95)” on page 2,
follow the steps below to install the drivers and other software.
Note for users with a parallel connection:
Before installing the software on your computer, make sure there is no
Stylus Scan driver already installed on your computer. If there is, see
“Uninstalling the parallel driver” on page 36 to uninstall the software
before following the steps below.
1. Turn on the computer and start Windows.
Note:
If you turn on the EPSON Stylus Scan before turning on your PC,
the computer may detect the Stylus Scan and display the New
Hardware Found dialog box or a similar wizard, following start-up.
If this occurs, click the
Cancel
button to close the dialog box, and
continue with installation as described below.
2. Insert the
EPSON Stylus Scan 2000 Software for Windows
CD-ROM in the CD-ROM drive. The Select Language dialog
box appears.
3. Select the language you want and click
OK
.
