31
R4C428_V2
Setup.bk
Rev_C
A5 size
SETUP.FM
1/13/00
Pass 0
R
Proof Sign-off:
K. Nishi, Crestec
_______
N. Nomoto
_______
K. Pipa
_______
Checking the Stylus Scan
Before using your EPSON Stylus Scan, make sure it works
correctly by printing a nozzle check pattern. You may also need
to clean the print head.
Loading Paper
Follow the steps below to load A4 or Letter size plain paper in the
paper feeder. The Stylus Scan prints on this paper when printing
and making copies.
1. Lower the output tray and slide out the extension. Next, slide
the paper edge guide to adjust the width of the loading area
so that it is slightly wider than the width of your paper.
2. Fan a stack of paper; then tap it on a flat surface to even the
edges.
paper edge guide
output tray