Epson SureColor T-3270 User Manual Download Page 36

Page: 36 / 213

Epson SureColor T-Series User’s Guide

Basic Operations

Buttons that are used in the following settings

Confirm that the printer is ready and press the

(

button.

The Load/Remove Paper menu will be
displayed.

Press the

buttons to highlight

Remove

Paper

and press the

button.

If roll paper is also loaded on Roll 1, select

Roll

, and then press the

button.

If On is selected for Roll Paper Remaining, the
printer will automatically print a barcode.

The paper will automatically be rewound.

After the paper is rewound, a beep tone sounds.

Lower the paper basket to the horizontal
position.

“Adjusting the Position” on page 50

Hold the drawer handles of Roll 2 unit, and then
pull the unit out.

Raise the roll lock lever.

Move the roll paper to the roll rest on top of the
printer.

Note:

When removing the roll paper, you can use the
optional roll paper belt to prevent the roll paper
from unwinding.

Summary of Contents for SureColor T-3270






















































































































































































































Search results

Summary of Contents for SureColor T-3270

Reviews:

Brands by name

Popular brands

Epson SureColor T-3270, User Manual

Search results

Summary of Contents for SureColor T-3270

Reviews:

Brands by name

Popular brands