Epson SureColor T-Series User’s Guide
Basic Operations
32
If roll paper is being inserted, paper is loaded
automatically, and a beep tone sounds.
7
Lower the roll lock lever.
8
Set the Roll 2 unit, and then press
Z
button.
9
Check the media type.
If a barcode giving information on the paper is
printed on the roll
When the paper is loaded, the barcode is read
automatically, and the Media Type and Roll
Paper Remaining settings are configured
automatically.
After
Ready
is displayed, you can print.
If a barcode giving information on the paper is
not printed on the roll
The display shows the Media Type currently
selected with the printer.
To print with the displayed settings, use the
d
/
u
buttons to select
Keep Settings Above
, and
press the
Z
button.
To change the settings, select
Change Settings
,
and press the
Z
button.
U
“Viewing and
Changing Media Settings” on page 43
Cutting the roll paper
The printer is equipped with a built-in cutter. You can
cut roll paper after printing by using one of the
following methods.
O
Auto Cut:
The cutter cuts automatically at a determined
position each time a page is printed in accordance
with the setting of the printer driver or control
panel menu.
O
Manual cut:
The cutting position is specified on the control
panel, and then the roll paper is cut. A cutline is
printed for manual cutting and can be used as a
guide when cutting paper using the built-in cutter.
